English Phonetics Charts

Latest Updates

Youtube Videos

View full screen »

1st Class English Narratives

View more »

16 Apr 2014

Method of Sealing CONTROL UNIT (BEL make Machines) with Strip Seal - Elections2014

 Method of Sealing CONTROL UNIT (BEL make Machines) with Strip Seal
Step-1: 
Keep the strip seal with the pre-gummed portion ’A’ positioned near the base of the green paper seal protruding from the lower portin of the outer door (See Photo-3). Remove the wax paper covering ‘A’. Then press the inner layer of the green paper seal over the gummed portion ‘A’. Also keep the outer layer of the green paper seal over the inner layer protruding from the lower portin of the outer door.

Step-2:
Remove the wax paper over the pre-gummed portion ‘B’ and press this pregummed portion ‘B’ over the outer layer of green paper seal protruding from the lower portion of the outer door.
After pasting ‘B’ over the green paper seal, the pre-gummed portion ‘C’ will come to the top position.

Step-3:
Remove the wax paper over the pre-gummed portion ‘C’ and press both the ends of green paper seal protruding from the upper portion of the outer door so that the inner layer of that green paper seal is firmly gummed to ‘C’.


Step-4:
Take the remaining portion of the strip seal around the control unit from left side taking care that the strip passes below the rubber cap covering the “CLOSE” button. Bring the other end of the strip seal from right side of the control unit on top of the outer door where the pre-gummed portions ‘A’, ‘B’ and ‘C’ have been pasted.
Step-5:
Remove the wax paper covering the pre-gummed portion ‘D’ and press it firmly over the outer layer of the green paper seal protruding from the upper portion of the outer door (See Photo 9 & 10). The pre-gummed portion ‘D’ spills over the strip seal below the “CLOSE” button. Press this spilled-over portion of ‘D’ firmly over the strip seal.
By the above process all the four loose ends of the green paper seals protruding from both sides of the outer door get firmly pasted and held by the strip seal. At the same time, the outer door over the result section is also sealed with this strip seal from all sides and this section cannot be opened without damaging this seal.

1 comment: